Four Post Lifts
Magnum 7000 lb. Storage/Service Lift (MAGFP7)
7000 lb. capacity and large 3″ cylinder, one-piece diamond-plate runways and scratch-resistant powder coat paint.
* MAGFP7 storage lift model is recommended for installation and use on flat surfaces only.
- 7000 lb. lifting capacity
- Carriages completely enclosed for safety
- Aircraft quality cables rated at 14500 lbs
- 18.5″ wide runways formed with one piece of 3/16″ non-skid diamond plate
- Hydraulic pump available in 110 or 220 vac
- Easy operation — lock handle is located by power unit minimizing any bending or squatting
- Large 3″ diameter cylinder is located safely under runway
| Lifting Capacity | 7000 lbs. |
| Overall Length | 171″ |
| Overall Width | 112″ |
| Overall Height | 84″ |
| Runway Length (without ramp) | 160″ |
| Runway Width | 18″ |
| Lifting Speed | 90 seconds |
| Width Between Columns | 99″ |
| Maximum Clearance Under Tracks | 65″ |
| Shipping Weight | 1485 lbs. |
* specifications subject to change without notice
Magnum 8000 lb. Deluxe Series Storage/Service Lifts (MAGFP8 & MAGFP8-XLT)
Smooth operation and good looks make a great first impression but it’s the safety features and durability that makes the “Deluxe Series” the best choice in storage/service lifts.
- 8000 lb. lifting capacity
- Carriages completely enclosed for safety
- Redundant ladder lock safety system with “auto engage” locking bar in the even of cable failure
- Extra large slider blocks for added stability
- 10 lock positions
- Aircraft quality cables rated at 14500 lbs.
- 18″ wide runways formed with one-piece 3/16″ non-skid diamond-plate
- Easy operation: Lock release handle located near power unit
- Large 3″ diameter cylinder
- Many available options
| MAGFP8 | MAGFP8-XLT | |
| Lifting Capacity | 8,000 | 8,000 |
| Overall Length with Ramps | 207″ | 222″ |
| Overall Width | 103″ | 109″ |
| Overall Height | 86.25″ | 96″ |
| Track Length | 165″ | 180″ |
| Lifting Height | 74.75″ | 82.25″ |
| Width Between Columns | 94.5″ | 100″ |
| Runway Width | 18″ | 18″ |
| Maximum Clearance Under Tracks | 70″ | 77″ |
| Power Pack | 110 v or 220 v | 110 v or 220 v
|
* specifications subject to change without notice
Magnum 14000 lb. Four Post Lift (MAGFP14)
This heavy duty chain driven lift is designed for many years of trouble free service. Our four post lifts are constructed with heavy gauge “C” channel.
- 14000 lb. lifting capacity
- Chain driven
- Single point pneumatic safety release mechanism
- Non-skid diamond-plate runways
- C-channel construction
- Hydraulic operation for minimum maintenance
- Premium powder-coated finish
| Lifting Capacity | 14000 lbs. |
| Overall Length | 208″ |
| Overall Width | 123″ |
| Lifting Height | 65.25″ |
| Maximum Wheel Base (2 wheel) | 192″ |
| Runway Width | 21″ |
| Width Between Columns | 108″ |
| Power Pack | 2hp 220/230 vac 20 amps |
| Shipping Weight | 2800 lbs. |
* specifications subject to change without notice
Magnum 14000 lb. Four Post Open Front Alignment Lift (MAGFP14-OA)
No obstructions! The open front design on our alignment lift allows total access to front wheel adjustment points and with the cylinder located under the track, there’s no power beam, eliminating risk of damage to doors and mirrors. (Shown with optional rolling jack and turntables.)
- 14000 lb. lifting capacity
- Cable driven
- Single point pneumatic safety release mechanism
- 20″ wide non-skid diamond plate runways
- Premium powder-coated finish
- Three turntable positions for multi-range wheel base
- Rear slip plates mounted on ring roller bearings
- Fully adjustable ladder locks
| Lifting Capacity | 14000 lbs. |
| Overall Length With Ramps | 291″ |
| Overall Width | 138″ |
| Width Between Columns | 116″ |
| Column Height | 98″ |
| Lifting Height | 73″ |
| Maximum Wheel Base (2 wheel) | 208″ |
| Maximum Wheel Base (4 wheel) | 158″ |
| Runway Width | 20″ |
| Width Between Runways | 43″ |
| Power Pack | 2hp 220/230 vac 20 amps |
| Shipping Weight | 4250 lbs. |
* specifications subject to change without notice
Magnum 14000 lb. Four Post Cable Driven Alignment Lift (MAGFP14A)
Cable drive design keeps the cylinder safely housed under the runway. Since there’s no power beam, we’ve eliminated the risk of damage to doors and mirrors.
- 14000 lb. lifting capacity
- Cable driven
- Single point pneumatic safety release mechanism
- 20″ wide non-skid diamond plate runways
- Premium powder-coated finish
- Heavy duty c-channel construction
- Three turntable positions for a wide range of vehicles
- Optional turntables are available
- Rear slip plates mounted on ring roller bearings
- Fully adjustable lock stops for easy leveling
| Lifting Capacity | 14000 lbs. |
| Overall Runway Length | 204″ |
| Overall Width | 136.75″ |
| Width Between Columns | 118.25″ |
| Width of Runways | 20″ |
| Width Between Runways | 31.25″ |
| Maximum Wheel Base (2 wheel) | 185″ |
| Maximum Wheel Base (4 wheel) | 158″ |
| Column Height | 88 5/8″ |
| Lifting Height | 9 7/8″ – 68 7/8″ |
| Power Pack | 2hp 220/230 vac 20 amps |
| Shipping Weight | 3800 lbs. |